The system is activated when the ignition is turned on. If there's object or vehicles being detected in the blind zone, the warning light will be lit, if the corresponding turning signal is triggered, the buzzer will provide warning beep. There's also an optional 3 way exterior horn.
The system consists of 4 ultrasonic BSD sensors mounted at the passenger side of the vehicle, one ECU, one GPS module, one button, one LED display, one indicator with buzzer built in, one pair of warning indicator and one set of wiring harness.
♦FEATURES
•Sensor: 28mm with 0° and 11° rubber angle sleeve
•Automotive OEM standard product designed for heavy duty commercial vehicle;
•Wide detection angle sensor with minimal blind zone;
•Sensor detection distance adjustable 1m or 3m;
•High sensitivity active sensors can be installed in metal or plastic bumper;
•LED Display unit and Meter/inch switchable;
•Left or right hand driving adjustable;
•GPS speed pickup, low speed work only;
•Switch to turn on & off the system working;
•IP69K waterproof exterior horn.
♦Applications
Autostar truck side blind spot detection systems can be fit for below vehicles :
♦Heavy duty truck
♦Large bus
♦Specialty vehicles
♦Parameter
Item | Specification |
Rated voltage | DC12V/24V |
Working voltage | DC9V/32V |
Working temperature | -30℃~+80℃ |
Storage temperature | -40℃~+85℃ |
ECU working currency | < 1.5A |
Sensor working frequency | 58±2KHz |
Horizontal detection angle | 60° |
Vertical detection angle | 30° |
Waterproof rate | IP67 |
Warning light working currency | <300mA |
Built-in buzzer volume | ≥80dB/10cm/12V |
Horn rated power | 20W |
Horn volume | ≥110dB/10cm/24V |
Installation